# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = /bin/sh

srcdir = .
top_srcdir = ..
prefix = /usr
exec_prefix = ${prefix}

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = /var/state
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/gnome-libs
pkglibdir = $(libdir)/gnome-libs
pkgincludedir = $(includedir)/gnome-libs

top_builddir = ..

ACLOCAL = aclocal -I macros
AUTOCONF = autoconf
AUTOMAKE = automake
AUTOHEADER = autoheader

INSTALL = /usr/bin/ginstall -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = i386-slackware-linux
build_triplet = i386-slackware-linux-gnu
host_alias = i386-slackware-linux
host_triplet = i386-slackware-linux-gnu
target_alias = i386-slackware-linux
target_triplet = i386-slackware-linux-gnu
AS = 
AUDIOFILE_CFLAGS = 
AUDIOFILE_CONFIG = /usr/bin/audiofile-config
AUDIOFILE_LIBS = -L/usr/lib -laudiofile -lm
AWK = gawk
CATALOGS =  ca.gmo cs.gmo da.gmo de.gmo el.gmo en_GB.gmo es.gmo et.gmo eu.gmo fi.gmo fr.gmo ga.gmo gl.gmo hr.gmo hu.gmo it.gmo ja.gmo ko.gmo nl.gmo no.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo sk.gmo sv.gmo wa.gmo zh_TW.Big5.gmo
CATOBJEXT = .gmo
CC = gcc
DATADIRNAME = share
DLLTOOL = 
DL_LIB = -ldl
ESD_CFLAGS = 
ESD_CONFIG = /usr/bin/esd-config
ESD_LIBS = -L/usr/lib -lesd -laudiofile -lm
GDK_IMLIB_CFLAGS = -I/usr/X11R6/include -I/usr/lib/glib/include -I/usr/X11R6/include
GDK_IMLIB_LIBS = -L/usr/lib -lgdk_imlib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
GENCAT = 
GLIB_CFLAGS = -I/usr/X11R6/include -I/usr/lib/glib/include
GLIB_LIBS = -L/usr/lib -lglib
GMOFILES =  ca.gmo cs.gmo da.gmo de.gmo el.gmo en_GB.gmo es.gmo et.gmo eu.gmo fi.gmo fr.gmo ga.gmo gl.gmo hr.gmo hu.gmo it.gmo ja.gmo ko.gmo nl.gmo no.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo sk.gmo sv.gmo wa.gmo zh_TW.Big5.gmo
GMSGFMT = /usr/bin/msgfmt
GNOMEUI_LIBS = -lgnomeui -lart_lgpl -L/usr/lib -lgdk_imlib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm -lgnome -lgnomesupport -L/usr/lib -lesd -laudiofile -lm -L/usr/lib -laudiofile -lm -ldb -L/usr/lib -lglib -ldl
GNOME_IDLDIR = -I${datadir}/idl
GNOME_INCLUDEDIR = -I${includedir} -DNEED_GNOMESUPPORT_H -I${pkglibdir}/include
GNOME_LIBDIR = -L${libdir}
GNOME_LIBS = -lgnome -lgnomesupport -L/usr/lib -lesd -laudiofile -lm -L/usr/lib -laudiofile -lm -ldb -L/usr/lib -lglib -ldl
GNOME_LIBS_DIR = /tmp/gnome-libs-1.0.53
GTKDOC = false
GTKXMHTML_LIBS = -lgtkxmhtml -lXpm -ljpeg -lpng -lz -lz -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
GTK_CFLAGS = -I/usr/X11R6/include -I/usr/lib/glib/include
GTK_CONFIG = /usr/bin/gtk-config
GTK_LIBS = -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
GT_NO = 
GT_YES = #YES#
HAVE_GTK_DOC = 
IMLIB_CFLAGS = @IMLIB_CFLAGS@
IMLIB_CONFIG = /usr/bin/imlib-config
IMLIB_LIBS = @IMLIB_LIBS@
INCLUDE_LOCALE_H = #include <locale.h>
INDENT = indent
INSTOBJEXT = .mo
INTLDEPS = 
INTLLIBS = 
INTLOBJS = 
LD = /usr/i386-slackware-linux/bin/ld
LIBGNOMEUI_LIBS = -L/usr/lib -lesd -laudiofile -lm -L/usr/lib -laudiofile -lm -ldb -L/usr/lib -lglib -ldl -L/usr/lib -lgdk_imlib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
LIBGNOME_LIBS = -L/usr/lib -lesd -laudiofile -lm -L/usr/lib -laudiofile -lm -ldb -L/usr/lib -lglib -ldl
LIBGTKXMHTML_LIBS = -lXpm -ljpeg -lpng -lz -lz -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
LIBOBJS = 
LIBSUPPORT = $(top_builddir)/support/libgnomesupport.la
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = makeinfo
MKINSTALLDIRS = ./mkinstalldirs
NM = /usr/bin/nm -B
NSL_LIBS = 
ORBIT_CFLAGS = -I/usr/lib/glib/include -I/usr/include
ORBIT_CONFIG = /usr/bin/orbit-config
ORBIT_IDL = /usr/bin/orbit-idl
ORBIT_LIBS = -L/usr/lib -lORBitCosNaming -lORBit -lIIOP -lORBitutil -lglib -lm
PACKAGE = gnome-libs
PERL = perl
POFILES =  ca.po cs.po da.po de.po el.po en_GB.po es.po et.po eu.po fi.po fr.po ga.po gl.po hr.po hu.po it.po ja.po ko.po nl.po no.po pl.po pt.po pt_BR.po ru.po sk.po sv.po wa.po zh_TW.Big5.po
POSUB = po
PTHREAD_LIB = -lpthread
RANLIB = ranlib
REBUILD = 
SUPPORTINCS = -DNEED_GNOMESUPPORT_H -I$(top_builddir)/support -I$(top_srcdir)/support
USE_INCLUDED_LIBINTL = no
USE_NLS = yes
UTIL_LIBS = -lutil
VERSION = 1.0.53
XPM_LIBS = -lXpm
ZVT_LIBS = -lzvt -lutil -lSM -lICE -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXext -lX11 -lm
cflags_set = yes
cxxflags_set = @cxxflags_set@
gnomelocaledir = ${prefix}/${DATADIRNAME}/locale
l = 
need_gnome_support = yes

SUBDIRS = gnome gnome-dev-info gnomeui zvt 	templates ui-guide gnorba gnome-libs-tutorial


TEXT_FILES =  	README.gtkcauldron				README.gtkcauldron_for_python			adding-file-manager-new-items.txt		adding-sounds.txt				api-comment-style.txt				gtk_dialog_cauldron.3				suggestions.txt					session-management.txt				mime-type-handling.txt


# automake does not yet dig .sgml files, so for now the DocBook
# files must be extra_dist.  Also, distribute the `.html' file
# so that people without DocBook can still use the docs.
EXTRA_DIST =  	TODO.sgml				gnome-doc-framework.txt			$(TEXT_FILES)


docdir = $(prefix)/doc
doc_DATA = $(TEXT_FILES)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = 
DATA =  $(doc_DATA)

DIST_COMMON =  README ChangeLog Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps devel-docs/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docdir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docdir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p; \
	  fi; fi; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	list='$(doc_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(docdir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.



all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = devel-docs

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive

install-data-am: install-docDATA
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-docDATA
uninstall: uninstall-recursive
all-am: Makefile $(DATA)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(docdir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: uninstall-docDATA install-docDATA install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# devel-docs/Makefile.am ends here

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
